Bullet-Resistant Doors

 

Maiman's bullet-resistant Thermal Fused flush doors look and function the same as our standard doors. The term "bullet-resistant" means that protection is provided against complete penetration, passage of fragments or projectiles, or spalling (fragmentation) of the protective material to the degree that injury would be caused to a person standing directly behind the bullet-resisting barrier.

These bullet resistant doors and frames are recommended for architectural use in offices, judicial chambers, law enforcement facilities, etc., where ballistic security is desired. Doors and frames are recommended to be purchased as a single assembly, not individually.

 

Product Features, Specifications, and Details
Thickness	1-3/4” (44.45mm). Available in UL protective levels 1, 2, 3 and 6.
Maximum Size	4’0” x 8’0”. Sizes greater than 4080 subject to mill acceptance. Pairs are available up to 8’0” x 8’0”.
Core	Multiple layers of woven roving ballistic grade fi berglass cloth impregnated with a thermoset polyester resin and compressed into fl at rigid sheets. Bonded with hardwood plywood on both sides as a base for veneer or laminate coverings.
Core Thickness	1/4” to 7/16” (6.35mm to 34.9mm). Specify protection level required (UL-1, 2, 3 and 6).
Door Lites	Total area of the cutout cannot exceed 40 percent of door area (30” wide or 54” high maximum). 1,296 sq. in. maximum clear lite. Metal lite frame kit and bullet resistant glass must match UL level requirement of project. Minimum distance from lite cutout to hardware cutout or edge is 3-1/4”.

 

NOTES:

1. Door weights are high due to bullet resistant core content. Select hardware for the application accordingly.
2. Use of door without approved frame is not recommended and not warranted.
3. For interior applications only.
4. Not available in double egress designs.
5. Bullet resistant astragal required with pairs.